Jeep 2008 Wrangler Скачать руководство пользователя страница 175

Страница: 175 / 466

•

Unzip the rear window starting at the right lower
corner of the window. Pull the zipper up, across the
top and down to the left lower corner.

Zipper pulls

will stay on the rear window.

Pull down on the rear

window to disengage from the zipper on the top
cover. Stow the windows carefully to avoid scratch-
ing.

7. Undo the Velcro

威

that runs along the top and rear

edge of the side window.

8. Beginning from the rear lower corner, completely
unzip the window.

9. Once unzipped, remove side window retainers from
the door channel and body side channel. Repeat this step
on the opposite side.

174

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 2008 Wrangler



















































































































































































































































































































































































































































































Результаты поиска

Содержание 2008 Wrangler

Отзывы:

Jeep 2008 Wrangler, Руководство пользователя, Страница: 175 / 466

Результаты поиска

Содержание 2008 Wrangler

Отзывы: