Jeep 2008 Wrangler Скачать руководство пользователя страница 369

Страница: 369 / 466

Jacking Instructions

WARNING!

Carefully follow these tire changing warnings to help
prevent personal injury or damage to your vehicle:

•

Always park on a firm, level surface as far from the edge
of the roadway as possible before raising the vehicle.

•

Block the wheel diagonally opposite the wheel to be
raised.

•

Set the parking brake firmly, and shift a automatic
transmission into PARK; or a manual transmission into
REVERSE.

•

Never start or run the engine with the vehicle on a jack.

•

Do not let anyone sit in the vehicle when it is on a jack.

•

Do not get under the vehicle when it is on a jack.

•

Only use the jack in the positions indicated and for
lifting this vehicle during a tire change.

•

If working on or near a roadway, be extremely careful of
motor traffic.

•

To assure that spare tires, flat or inflated are securely
stowed, spares must be stowed with the valve stem
facing the ground.

•

Turn on the hazard warning flasher.

Jack Warning Label

368

WHAT TO DO IN EMERGENCIES

Содержание 2008 Wrangler



















































































































































































































































































































































































































































































Результаты поиска

Содержание 2008 Wrangler

Отзывы:

Бренды по названию

Популярные бренды

Jeep 2008 Wrangler, Руководство пользователя

Результаты поиска

Содержание 2008 Wrangler

Отзывы:

Бренды по названию

Популярные бренды