Jeep 2008 Wrangler Скачать руководство пользователя страница 116 | Manualshive

Страница: 116 / 466

Jeep 2008 Wrangler Скачать руководство пользователя страница 116

9. Turn the steering wheel back to center.

10. Press and hold the ESP OFF button for seven seconds.

11. Cycle the ignition key to OFF.

After performing the ESP disable procedure correctly,
“ESP OFF” will be displayed in the odometer for approxi-
mately 12 seconds each time the ignition is moved to ON.
Repeating the ESP disable procedure will re-enable nor-
mal ESP operation.

ESP/BAS Warning Light

The malfunction indicator lamp for the ESP is
combined with the BAS indicator. The ESP/
BAS Warning Light in the instrument cluster
comes on when the ignition switch is turned to

the “ON” position. It should go out with the engine
running.

If the ESP/BAS Warning Light comes on continuously
with the engine running, a malfunction has been detected
in either the ESP or the BAS system, or both. If this light
remains on after several ignition cycles, and the vehicle
has been driven several miles at speeds greater than 30
mph (48 km/h), see your authorized dealer as soon as
possible to have the problem diagnosed and corrected.

NOTE:

•

⬙

The ESP/BAS Warning Light comes on momentarily

each time the ignition switch is turned ON.

•

Each time the ignition is turned ON, the ESP System
will be ON even if it was previously turned off.

•

The ESP Control System will make buzzing or clicking
sounds when it is active. This is normal; the sounds
will stop when ESP becomes inactive following the
maneuver that caused the ESP activation.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

115

3

«
...
114
115
116
117
118
...
»

Содержание 2008 Wrangler



















































































































































































































































































































































































































































































Отзывы:

Нет отзывов