Jeep 2006 Grand Cherokee Скачать руководство пользователя страница 334 | Manualshive

Страница: 334 / 448

Jeep 2006 Grand Cherokee Скачать руководство пользователя страница 334

4. Locate the jack as shown. For the front axle, place it
under the front lower control arm as shown. For the rear
axle, place it under the axle near the wheel to be changed.
Ensure the jack is closest to the inside of the wheel when
jacking on the rear axle.

Do not raise the vehicle until

you are sure the jack is fully engaged.

5. Raise the vehicle by turning the jack screw clockwise.
Raise the vehicle only until the tire just clears the surface
and enough clearance is obtained to install the spare tire.
Minimum tire lift provides maximum stability.

Front Jacking Location

Rear Jacking Location

334

WHAT TO DO IN EMERGENCIES

«
...
332
333
334
335
336
...
»

Содержание 2006 Grand Cherokee

































































































































































































































































































































































































































































Отзывы:

Нет отзывов