Jeep 2006 Grand Cherokee Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 448

Jeep 2006 Grand Cherokee Скачать руководство пользователя страница 124

To Activate

1. Select “Auto Headlamp Low/High Beams? — Low/
High Beam.” Refer to “EVIC — Customer Programmable
Features” in Section 4 of this manual.

2. Turn the end of the multi-function control lever to the
A (Auto) headlight position.

NOTE:

This system will not activate until the vehicle is

at or above 20 mph (32 km/h).

To Deactivate

1. Pull back on the muti-function control lever to manu-
ally deactivate the system (normal operation of high
beams).

2. Pull back on the multi-function control lever once
again to re-activate the system.

NOTE:

Broken, muddy, or obstructed headlights and

taillights of vehicles in the field of view will cause

headlights to remain on longer (closer to the vehicle).
Also, dirt, film, and other obstructions (sticker, toll box,
etc.) on the windshield or camera lens will cause the
system to function improperly.

Instrument Panel and Interior Lights

When the multi-function control lever is in the parklight,
headlight, or A (Auto) position (if equipped), rotating the
center portion of the lever up and down will increase and
decrease the brightness (dimmer control) of the instru-
ment panel lights. Full daytime brightness on all elec-
tronic displays (odometer, overhead console, radio, and
Automatic Climate Control (if equipped) is obtained by
rotating the center portion of the control to the first
detent above the dimmer range. Rotating the control to
the second detent above the dimmer range turns the
interior lights on. Rotating the control to the “Off”
(extreme bottom) position disables all the interior lights,
even when the doors and liftgate are open. While in the

124

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
122
123
124
125
126
...
»

Содержание 2006 Grand Cherokee

































































































































































































































































































































































































































































Отзывы:

Нет отзывов