Jeep 2006 Grand Cherokee Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 448

Jeep 2006 Grand Cherokee Скачать руководство пользователя страница 101

Things You Should Know About Your UConnect™
System

Voice Recognition (VR)

•

Always wait for the beep before speaking.

•

Speak normally, without pausing, just as you would
speak to a person sitting approximately eight (8) feet
away from you.

•

Make sure that no one other than you is speaking
during a voice recognition period.

•

Performance is maximized under:

•

low-to-medium blower setting,

•

low-to-medium vehicle speed,

•

low road noise,

•

smooth road surface,

•

fully closed windows,

•

dry weather condition.

•

Even though the system is designed for users speaking
in North American English, French, and Spanish ac-
cents, the system may not always work for some.

•

When navigating through an automated system, such
as, voice mail, or when sending a page, at the end of
speaking the digit string, make sure to say

⬙

send.

⬙

•

Storing names in phonebook when vehicle is not in
motion is recommended.

•

It is not recommended to store similar sounding
names in the UConnect™ phonebook.

•

UConnect™ phonebook name tag recognition rate is
optimized for the voice of the person who stored the
name in the phonebook.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

101

3

«
...
99
100
101
102
103
...
»

Содержание 2006 Grand Cherokee

































































































































































































































































































































































































































































Отзывы:

Нет отзывов