Jeep 2006 Grand Cherokee Скачать руководство пользователя страница 117 | Manualshive

Страница: 117 / 448

Jeep 2006 Grand Cherokee Скачать руководство пользователя страница 117

To Disable A Transmitter Linked to Memory

1. Turn the ignition switch to the OFF position and
remove the key.

2. Press and release memory button number 1. The
system will recall any memory settings stored in position
1. Wait for the system to complete the memory recall
before continuing to step 3.

3. Press and release the memory SET (S) button located
on the driver’s door.

4. Within 5 seconds, press and release memory button 1
on the driver’s door.

5. Within 5 seconds, press and release the “Unlock”
button on the Remote Keyless Entry transmitter.

To disable another transmitter linked to either memory
position, repeat steps 1-5 for each transmitter.

NOTE:

Once programmed, all transmitters linked to

memory can be easily enabled or disabled at one time.
Refer to Remote Linked to Memory under

⬙

Electronic

Vehicle Information Center (EVIC) — Customer Pro-
grammable Features

⬙

in Section 4 for more information.

Easy Entry/Exit Seat

This feature provides automatic driver’s seat positioning
which will enhance driver mobility out of and into the
vehicle.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

117

3

«
...
115
116
117
118
119
...
»

Содержание 2006 Grand Cherokee

































































































































































































































































































































































































































































Отзывы:

Нет отзывов