Current instructions at www.jeco-inc.com
1-800-893-3006
Page 2 of 3
To Assemble:
Step 1:
Carefully attach pump (C) to the hose inside product body (A), making sure to
place the pump in the bottom of the wall fountain body (A).
Step 2:
Carefully align the net (B) to the wall fountain body (A), making sure it fits well.
Step 3:
Fill the basin (B) with clean water, making sure the pump (C) is fully submerged.
Note:
The maximum water level should be approximately 1.2 inches below the top edge of
the basin (B).
