JEANTIL MVV 9, Инструкция по эксплуатации

Страница: 23 / 34

23
9. Adjustments and maintenance
1 – GREASING
1. Whilst using the equipment, grease every day.
2. The various greasing points are arranged as follows:
- 1 greaser on the two spiders of the drive shaft (not on diagram below).
- 1 greaser on the four bearings of the side conveyor.
- 1 greaser on the ball joint of the stand foot.
- 1 greaser on the planetary reduction gear + 1 screw on vent for changing/filling
oil level reservoir.
- 1 greaser on the two cylinder hinges of trapdoor.
3. Grease regularly the trapdoor slideways.
4. Regularly oil hinges and pins which are not fitted with greasers.
GREASING DIAGRAM :
1 1
1
1
1
1
2 2
3
3
4 4