24
9-SPEED OF MOVING FLOOR’S HYDRAULIC MOTOR
1.
The speed of the moving floor’s hydraulic motor is electrically controlled. The
first
electric button
marked
0 (- +)
located at the bottom of the electric control unit, enables
to adjust the speed of the moving floor depending on the load in the body and in certain
cases of certain difficult products: (ex: compact manure, etc.).
2.
The flow regulator vernier scale graduated
0-1-2-3-4-5,
and located behind a transparent
screen on the front housing, is used to control the adjustment.
10-TORQUE LIMITER WITH TWO ADJUSTABLE AND DECLUTCHABLE CAMS
(secondary EPAN 5)
WALTERSCHEID
1.
It protects the spreading device against overload, foreign matters and an excessive speed
of the moving floor.
2.
Located on the secondary transmission
(K64/22R).
3.
The jaw with freewheel is fitted on the main longitudinal shaft side, towards the front of
the spreader.
4.
The jaw with torque limiter is fitted on the vertical beater drive side.
5.
The torque limiter calibrations are:
Transmissions
Limiters
Machines
Gear box
N° Speed
Type
Calibration
Dimension A
EVR
811103
540revs/min 200
daNM
10-6
12-8
13-10
15-12
SRT 8
811 101
1000revs/min 165
daNM
14-11
14-12
16-12
16-12 T
18-14
18-14 T
21-15
SRT 12
814181
540revs/min 200
daNM
10-6
12-8
13-10
15-12
GB 540
814182
1000revs/min
2 declutchable cams K 64/22R
165 daNM
14-11
14-12
16-12
16-12 T
18-14
18-14 T
21-15
GB 1000
