Jeanneau SUN ODYSSEY 50DS, Руководство пользователя, Страница: 111 / 156

107/152
MAINTENANCE
Clean the repeater dials with freshwater. Refer to the instructions before using any
other produce. The use of alcohol must be avoided.
ELECTRONIC
LEAD LINES
The log and depth sounder sensors are located under the forward cabin floor. Keep the log
sensor cowl close to the instrument so as to be able to intervene in complete safety.
Do not store material on top of the sensors.
AUTO PILOT
The pilot consists of several elements listed as follows:
- Repeater in the cockpit.
- Compass in the cabin hanging locker located in rear port.. A pictogram helps to locate it
easily.
- Logic controller, valve, hydraulic pump, rudder blade on both sides of the bar sector in the
rear cabinet (access from one of the two cockpit cabinets in the rear cabin port).
- To supply power to all elements switch on the "Navigation" circuit breaker on the electrical
panel.
- For use and maintenance of the material consult the manufacturer instructions.
MAINTENANCE
Clean the transducer probe during each dry dock and the log sensor regularly. Read the
instructions for maintenance recommendations.
Refer to chapter 12 "Launching" for the precautions to be taken concerning the sensors during
hoisting.
ADVICE - RECOMMENDATION
- Place the protective covers on the repeaters when unused for long periods.
- When sailing store the protective covers inside the boat to avoid losing them.
- The various repeater displays are back-lit.
- The onboard radio is fitted with two outside speakers.
- When mooring be careful to adjust the sound so as not to disturb your neighbours.
ADVICE - RECOMMENDATION
- For best results, remove any metal compass.
- Do not store material close to the calculator and electrical connections.
9
E
L
E
C
T
R
IC
A
L
E
Q
U
IP
M
E
N
T