Jeanneau SUN ODYSSEY 39DS Скачать руководство пользователя страница 110 | Manualshive

Страница: 110 / 118

Jeanneau SUN ODYSSEY 39DS Скачать руководство пользователя страница 110

106/114

LAUNCHING RECOMMENDATIONS

A lot of skill and care is required to commission your JEANNEAU boat. The proper working of
all your boat's equipment is the result of the quality of the commissioning operations.

The initial launching and the first tests of the different equipments shall be carried out by your
JEANNEAU dealer or agent so you can expect to enjoy the warranty in case of some
equipment failure.

If later you have to launch your boat yourself, you should take the following precautions:

BEFORE LAUNCHING

- If your boat is to be fitted with sounder and speedometer, allow for the relevant fittings and

their installation.

- Check the water intake strain box for cleanliness.

- Check the engine and reduction gear oil levels (refer to engine manual).

- Turn off the engine cooling water drain valves.

- All the optional accessories shall be sealed with paste.

- Retract the speedometer into its housing (it may be damaged by the handling belts).

- For the on-line engines, check the anode at the end of the shaft is in place. Check the nut

tightening (the lock washer shall be turned over onto the nut). The anode shall not be
painted.

- Turn off all the water inlet and drain valves (sink, washbasin, heads, engine).

«
...
108
109
110
111
112
...
»

Содержание SUN ODYSSEY 39DS























































































































Отзывы:

Нет отзывов