Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you keep
the good numbering when you turn the pages of the I/B.
Don’t change the page numbering. Keep the language
integrity.
11
170407
Assembly page 11/16
Fax +32 2 359 95 50
Answer:
It is possible that the stand mixer has not been switched on at the wall socket or the
speed setting has not been selected. Before re-attempting to turn the stand mixer back on
check that it is plugged in and switched on (the light around the speed dial will be blinking). To
check that the stand mixer is working correctly, move the speed dial to speed setting 1. Finally
ensure that the attachment and splash guard are fitted correctly. If this is all in place the mixing
arm will have to be completely tilted down otherwise the stand mixer will not work.
Question:
Why is my mixture splashing out over my work surface?
Answer:
The speed used for the attachment may be too high for the ingredients in the bowl,
please lower the speed being used. Please ensure that the splash guard has been correctly
fitted to the bowl.
Question:
My stand mixer moves a lot on the kitchen counter when mixing. Is this normal?
Answer:
Whilst this stand mixer is fitted with anti-slip rubber suction feet,
heavier ingredients such
as dough may cause your stand mixer to move from side to side while in use. Some kitchen
surfaces will allow the mixer to walk slightly across the kitchen counter as a result. This is normal
for heavy ingredients. Your stand mixer will be fine but it should never be left unattended
during the mixing process.
CARE AND CLEANING OF YOUR STAND MIXER
Always unplug the appliance from the power supply before cleaning it.
Remove the accessories before washing them in soapy water. Do not use scouring pads
for the plastic materials. Do not place them in the dishwasher.
Do not clean with any abrasive scouring pad or steel wool, as this will damage the finish.
You can wipe the motor block with a soft damp cloth.
Do not immerse the motor block in water or any other liquid.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EU
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
on the
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
ErP Declaration – Regulation 1275/2008/EC
We, JD Williams Ltd., hereby confirm that our product meets the requirements of regulation
1275/2008/EC. Admittedly, our product does not dispose of a function to minimize the power
consumption, which should according to regulation 1275/2008/EC put the product in off or
standby mode after finishing the main function, but this is practically impossible, as it would
compromise the main function of the product so strongly, that using the product would no
longer be possible!
For this reason we always tell the customer in our instruction manual to unplug the appliance
immediately after use.
The user manual is by simple request also available in electronic format from the after-sales
service (see warranty card).
