Page
10
repeater.
(Room Temperature)
Troubleshooting
1)
The power LED at the front turns OFF
Causes
Action
Power cable of the power supply
unit has not been connected.
Check connection of power system
2)
The repeater transmits no signal
Causes
Action
Signal Cable from outdoor
antenna has not been
connected.
Check all connections.
Coaxial cable connecting the
repeater and outdoor antenna
might be defective
Make sure there is no sharp bends, or
breaks in the cable. If needed, replace
coaxial cable
3)
For more information, call JDTECK Ltd. at 1-877-453-8325 or email us at
