JDS Uniphase RX3 Series, Руководство пользователя

Страница: 9 / 55

viii
Table 2: Laser Class and Parameter Limits
Parameter Specification
Wavelength 850 –1650 nm
Class 1*
Output power 0.32 mW (max)
* Per standard IEC 60825-1 and FDA standard 21CFR1040.10 except deviation per Laser Notice No. 50 July 2001.
Before Initializing and Operating the Unit
;
Inspect the unit for any signs of damage, and read the user’s manual thoroughly.
;
Install the unit as specified in the Getting Started section.
;
Ensure that the unit and any devices or cords connected to it are properly grounded.
Operating the Unit
Warning
To avoid the risk of injury or death, always observe the following precautions
before initializing the unit:
If using a voltage-reducing autotransformer to power the unit, ensure that
the common terminal connects to the earthed pole of the power source.
Use only the type of power cord supplied with the unit.
Connect the power cord only to a power outlet equipped with a protective
earth contact. Never connect to an extension cord that is not equipped with
this feature.
Willfully interrupting the protective earth connection is prohibited.
Never look into the end of an optical cable connected to an optical output
device that is operating. Laser radiation is invisible, and direct exposure can
severely injure the human eye. For more information, see the user’s manual
of the laser source in use.
Turning off the power to the device does not always block the externally
supplied radiation to the connector at the output of the unit.
Do not use the unit outdoors.
To prevent potential fire or shock hazard, do not expose the unit to any
source of excessive moisture.
Do not operate the unit when its covers or panels have been removed.
Do not interrupt the protective earth grounding. Any such action can lead to
a potential shock hazard that can result in serious personal injury.
Do not operate the unit if an interruption to the protective grounding is
suspected. In this case, ensure that the unit remains inoperative.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com