JDS Uniphase HST-3000 OLP-3057, Руководство пользователя

Страница: 39 / 54

Chapter 3 Optical Testing
Broadband testing
HST-3000 OLP-3057 Optical Power Meter User’s Guide
21
To select a wavelength
1 Press the Display soft key.
2 Select Set Lambda , and then select a wavelength from
the list.
The wavelength is selected and displayed in the measure-
ment results window.
Editing the
wavelength list
You can edit the Set Lambda list to show only the wave-
lengths you need. For example, if you frequently use 1310
and 1550 nm, you can specify that only those two wave-
lengths are displayed.
To edit the wavelength list
1 Press the Configure navigation key.
The wavelength table menu appears.
2 Use the up and down keys to highlight the specified wave-
length.
3 Press the Show soft key to toggle the check mark.
The check mark indicates whether the wavelength is
shown (checkmark) or hidden (blank) in the Set Lambda
list.
4 Repeat steps 2 and 3 to select up to 8 wavelengths.