If our nutstrips were purchased, remove whatever factory nut strips were inside the
frame rails first. (If installed) You will need to unbolt any hitches, skids, or exhaust mounts
that are bolted under the frame.
Insert the new nutstrips into frame. You may want to loosely install one bolt on the
forward most hole to help keep them aligned. For more inststruction, please look at the
XJ Rear Nutstrip Install Instructions.
If not using nutstrips, the uniframe tie-in brackets will need to be loosely installed before
the bumper. (See step 11) By utilizing the lock washer inside the frame, the tie-ins will
later be able to be tightened down without needing a wrench on the nut. Just remember
to keep them somewhat moveable for alignment purposes at this time.
3.
4.
5.
INSTALL ATION
