JCR Focus RS, Руководство пользователя

Страница: 15 / 23

INSTALLATION
Seat runner and bracket assembly
During assembly, unless otherwise stated, all M6 bolts should be torqued to
18Nm and all M8 bolts to 24Nm.
It is recommended that a thread lock compound of Loc.te 241 or equivalent
is used on bolts during assembly.
Assemble the upper brackets to the runners using 2 of the M6x16 and locking
nuts (HW5 hex and 11mm ring spanner) and 2 of the M8x16 bolts and locking
nuts (HW6 hex and 13mm ring spanner) supplied in the fastener bag for each
bracket. Note the orienta.on of the direc.on arrows on the brackets (ensure
they point towards the end of the runners where the adjuster bar mounts).
Ensure the runners are square to each other before torqueing.
For ease of assembly you may need to move the runners to access the bolt holes.
To do so, press down on the adjuster mechanism on both runners (1) in the
below loca.on.
WARNING
15
1