INSTALLATION
OEM runner removal
Once away from the car, the OEM runners must be removed from the RECARO
seat
Care should be taken not to damage the M6 bueon head internal hex. These
will be reused. Unbol.ng torque should be applied to the corresponding nut
on the inside face
Locate the 2 M6 bolts (1,2) (HW4 hex) and corresponding nuts which secure the
RECARO seat base to the outer OEM runner.
–
Apply unbol.ng torque to the internal nut (10mm deep socket)
–
Remove nut from bolt and retain
–
Carefully remove the runner
The OEM adjuster bar is connected to the runner with a spring. Care should
be taken when removing the runners as this may come off
WARNING
WARNING
1
2
11
Содержание Focus RS
Страница 1: ...V1 3...
