JCR Focus RS, Руководство пользователя

Страница: 7 / 23

INSTALLATION
Seat removal
To begin the installa.on process, you must first remove the seats and OEM seat
frames from the car as one unit.
Please ensure the igni.on is OFF during the en.re installa.on.
Failure to turn the igni.on off may result in fault codes being stored in the
vehicle restraints system.
Please begin by disconnec.ng the harness connector block. This can be found
under the front edge of the seat bolster.
–
Unbolt the connector (7mm socket) (1)
–
Unclip the connector from the moun.ng bracket (2)
–
Separate the two sides of the connector
WARNING
1
2
7