JCM Part No. 960-000076R_Rev. 1
© 2007, JCM-American Corporation
2 - 2
Section 2
World Bill Acceptor (WBA®-1x/2x-SS & SS2)
Installation/Operation
3. To install the new bill guides, push the
guides back into the Acceptor Head slot
from the front until you hear a click
(See Figure 2-4). Be sure to push the guides
into the assembly in the correct direction.
Input/Output Circuits
1. Figure 2-5 and Figure 2-6 illustrate the
various WBA Input/Output Circuit
Diagrams.
Figure 2-3
Removing Old Bill Guides
Figure 2-4
Installing New Bill Guides
Figure 2-5
WBA 12, 13, 22 & 23 Input/Output Circuit Diagram
Figure 2-6
WBA 10, 11, 20 & 21 Input/Output Circuit Diagram