SATURN CHAIR INSTRUCTION MANUAL
Adjusting Height/ Tilt of Chair – Gas Spring
Reference: Figure 1 – Height and Tilt Adjustment (Gas Piston).
Arrow 1:
Pulling and holding this lever inwards whilst controlling the chair by the grab handles enables you to alter the seats
tilt/prone angle. The chair has been designed to offer a substantial variation of positioning and support, which the
tilt/prone angle mechanism can help to demonstrate. The chair can be positioned at any point within this range to
suit whatever situation. The chair offers around 20 degrees of tilt movement and approximately 15 degrees of prone
movement.
Arrow 2:
Pulling and holding this lever inwards whilst controlling the chair by the grab handles enables you to alter the seats
vertical height. The chair has been designed to fit under nursery tables and raise high enough for positioning at
dining room tables. The chair can be positioned at any point within this range to suit whatever situation.
IMPORTANT
Always ensure that the height/tilt mechanism is free from obstruction before operating this chair.
Never Over Adjust or Over Tighten Moving Parts!
Figure 1 – Height and Tilt Adjustment.
Page 2
Arrow 1
Arrow 2