JCM Neptune, Инструкция по эксплуатации, Страница: 6 / 20

6
• Ensure all adjustment mechanisms are secure and in place before operation. If it is likely that the
hand-wheels will be repeatedly loosened, JCM can supply allen key bolts as an alternative. We
strongly recommend this if there is a danger from those in the vicinity of the user.
• After completing any alterations ENSURE all nuts, bolts, knobs, hand wheels and other fixings are
securely tightened and in position, and that they are regularly checked as part of the maintenance of
the chair. Never over adjust or over tighten moving parts.
• All postural support straps and harnesses should be in place and properly adjusted to the user, prior
to usage of any kind (see pages 8 & 9).
• When fitted to an indoor base frame the Neptune should always be positioned on a level, flat floor.
The Neptune chair can be moved between one working area and another. For safety ALWAYS return
the product to a neutral position and lower before moving (lower in height, level the seat, ensure
the back is upright etc). After the chair has been moved and during use the chair should be placed
in a static position with the brakes applied. Indoor base frames such as the compact base are
designed to be used inside, however it is acceptable to take these bases externally for a brief period
if transferring the chair from one indoor area to another.
• Heavy items on the tray will affect stability. The fitting of anything other than the standard JCM tray
may substantially affect the stability of the seating system and should therefore be checked before
issue.
• If at any time it is noted that areas of the users skin remain reddened after being out of the seating
system for around 10 minutes, urgently contact the qualified professional who performed the hand
over of the equipment. This may be a sign of excessive pressure being exerted by the seating. This
might occur in the initial use of a new seat where further adjustment may be required, where the
user has been badly placed, grown or where an underlying medical problem exists. Review may be
necessary in such cases
• Keep all products away from excessive sources of heat, cigarettes and naked flames.
• If you suspect that the system may be faulty, cease use of the equipment straight away and
immediately contact the organization who supplied the system. (JCMs contact information can be
found on the back cover).
• The equipment will be labelled with important information. NEVER REMOVE these information labels
or allow them to be defaced, overlaid or altered.
• All modifications, adjustments, reconditioning, repairs, disposal, and servicing of the seating unit
must ONLY be carried out by the agencies who supplied the equipment (see pages 16 and 17).
Important Safety Advice
!
We at JCM are committed to producing products of the highest standard. All of our products
fulfil the essential safety and environmental requirements as defined in the European Directives.
However, improper use of the products will potentially put the users at risk and therefore JCM
strongly suggest that the following information is strictly adhered to at all times.
Throughout the manual there are important points to note identified by the symbol:
!