JCM Neptune Скачать руководство пользователя страница 19

19

Most JCM Seating Solutions Ltd. products are 

individually assessed for a client prior to issue. 

They are handed over in a controlled way to 

ensure optimum fit and specification, checks are 

completed and any additional individual verbal 

instructions given. We therefore recommend the 

following points are adhered to prior to any re-

issue of equipment:

• 

Cleaning 

Follow a rigorous process of cleaning in order 

to decontaminate the product and eliminate the 

chance of cross infection. 

• 

Assessment of Fabrics / Foams 

Carefully assess the condition of fabrics and 

foams in the seating product, and have these 

replaced partially or even completely if need 

be. In severe cases if the chassis is worn 

and the seating in poor condition it may be 

necessary to have the product re-furbished by 

the manufacturer. In very severe cases if the 

chassis is badly worn and the seating in very 

poor condition then the product should be 

decommissioned and disposed of. 

• 

Electrical and Electronic Equipment 

Decomissioning

If your product is set up with an electrical 

function you should always contact JCM 

or your authorised representative for de-

comissioning information.

• 

Appropriateness of Equipment

Check that the equipment supplied is 

appropriate for the needs of the user taking 

age, weight, ability, diagnosis, and any other 

important factors into account. For instance, 

JCM Seating Solutions Ltd. products may not 

be suitable for persons with severe challenging 

patterns of behaviour. Also ensure safe 

specified limits for use are not exceeded by the 

new user. Your sales representative can advise 

on the suitability of the equipment.

• 

Manuals and Records

Ensure this instruction manual and any 

additional manuals for the seating unit 

are handed over to the new user with the 

equipment and ensure the servicing log history 

is up to date. Records on the new user must be 

updated to maintain traceability.

• 

Inspection

The equipment should have a rigorous 

inspection prior to the reissue, to include 

the points covered in the six monthly routine 

check, regardless of if the checks were recently 

completed. The equipment should be free of 

excessive wear or distortion in any aspect of its 

main construction or accessories.

• 

Condition

Wheels, tyres and brakes must be in good 

working condition, properly adjusted and 

inflated as appropriate.

• 

Accessories

Check all accessories carefully for damage and 

potential shortcomings which may pose a risk 

to the user.

• 

Function

Ensure that all the functions of the chair are 

working correctly e.g. tilt in space, height 

adjustment, back recline, folding etc.

• 

Fixings

Check that any knobs, hand wheels, nuts, 

bolts, levers and fixings are in good condition 

and fitted in place securely.

• 

Modifications

Any special modifications, adaptations, 

alterations or other such procedures including 

added accessories may require review. If they 

are found inappropriate, remedial action (if 

considered safe and practical) should be taken 

to reverse them if possible.

• 

Labelling

Any labelling specific to the previous user 

should be removed and replaced with labelling 

specific to the new user.

• 

Adjustment

Adjustment of the equipment to the new user 

must be carried out by suitably qualified and 

experienced professionals. These adjustments 

along with the other appropriate checks and 

tests should be completed with the owners 

knowledge and agreement. 

• 

Hand Over

Competent handing over of the equipment to 

the new user or attendant must include proper 

training and advice in safe use, particularly 

regarding transportation issues.

• 

Packaging

Always ensure that the chair is packaged 

correctly before delivery.

• 

Handle Fitting

Please note that the handle fitted is dependent 

on the size of the chair. You therefore need to 

ensure the size label on the handle matches 

the size of the chair being used.

Inspecting & Reissuing of Equipment

Содержание Neptune





















Отзывы: