JCM Neptune, Инструкция по эксплуатации, Страница: 15 / 20

15
Legrest Detachment / Attachment
• Pull and lock open plunger A1 (by rotating
90°) which is on the right hand side of the
seat as you are looking at the chair.
• Pull and hold open the plunger A2 which is
(on the left side of the seat as you are looking
at the chair) to enable you to disengage the
legrest from the main seating unit.
Legrest Length (3 positions)
• Hold open plunger (B) on the back
of the leg rest post and re-locate into
one of the holes in the legrest stem.
Footplate Angle / Flip Away
• Using plungers (C) on either side of
the chair, select the relevant hole and
release the plungers into the hole to
secure the footplate in place.
• The footplate can be flipped up manually to
allow clearance for standing transfers etc.
Footplate Height / Length
• Loosen bolt (D) by half a turn with a 4mm allen
key so you can slide the footplate up and down
the leg stem.
Note: For the shortest length raise the footplate
up the leg stem to the minimum and close the leg
stem to the minimum setting.
Sandal Fixing
• Underneath the footplate loosen the central
allen key bolt turning anti-clockwise.
• Rotate the sandal to the desired position along
slot (E).
• Fix in place by tightening the allen key bolt
beneath the footplate
Do not use foot straps unless the client is wearing shoes.
!
Legrest, Footplate & Sandal Adjustment
Foot Straps
Foot straps or ankle
supports can be attached
through the slots in the
sandal to secure feet.
Feed the strap through the
buckle and close the buckle
shut to secure. Alternatively
a fixing kit can be supplied
to fit the ankle supports
directly to the footplate.
E
A
1
A
2
B
D
C
View from
back of seat