14
Pommel Adjustment
A
Height
Note:
The height adjustment
is used for removing the
pommel or adjusting
accordingly to the height
of the chair cushion.
•
Pull and hold out
plunger (A) whilst
moving the pommel up
or down to achieve the
desired height.
•
Release plunger (A)
relocating it into one
of the holes (B) in the
pommel bar. Always
ensure the plungers
are locked securely in
place, before use. (The
pommel can also be
removed this way).
C
B
Hip Pad Adjustment
Hip Pad Width
•
Un-tighten allen key bolt (A) by a half turn
using the 4mm allen key supplied. Then
slide the hip pad along the hip pad bar
(B) to set at the desired width.
•
Re-tighten the allen key bolt (A) to secure
the pad in place.
A
B
Fore and Aft
•
Un-tighten allen key bolt (C) and move the pommel along the slot in
the metal pommel bracket.
•
Re-tighten bolt (C) to secure in place.
Tip
You can get additional fore and aft adjustment by removing the fixing
screw (C) altogether then dismounting the pad from the metalwork,
rotating the metalwork 180°, re-fixing the pad and replacing the bolt (C),
tightening in place.
Содержание Neptune
Страница 1: ...1 Neptune INSTRUCTION MANUAL...