JCM iPRO-100-SH2-RC Скачать руководство пользователя страница 35

Страница: 35 / 146

P/N 960-000164R_Rev. 3 {EDP #213631}

2 - 9

Installation

iPRO-RC™ Series Banknote Recycler

Section 2

Preventive Maintenance

Restoring Banknotes

To restore Banknotes into the Recycle Unit, per-

form one (1) of the following two (2) procedures:

ESTORING

ANKNOTES

USING

THE

PRO



RANSPORT

NIT

1. Insert Banknotes note-by-note in a single fashion

into the iPRO

™

Transport Unit Insertion Slot

(Figure 2-5

ESTORING

ANKNOTES

IRECTLY

INTO

THE



ECYCLER

NIT

1. Turn the iPRO-RC™ Power Supply OFF.
2. Unlock and open the Recycler Unit’s Door using

the Key provided.

3. Smooth and insert the Banknote edges being fed

into the Recycler Unit (Figure 2-5

4. Close the Recycler Unit’s Door, and lock it using

the Key provided.

Once Banknote restoration is complete, the data

containing the number of restored Banknotes is

sent from the Host Machine to the iPRO-RC™.

Retrieving Banknotes

To retrieve Banknotes from the Recycler Unit,



perform one (1) of the following three (3)



procedures.

Sending Retrieved Banknotes to the



Cash Box

1. Send a Command to the iPRO-RC™ Unit from

the Host Machine in order to enable the Restore

Pushbutton Switch Functions.

2. Press the Restore Pushbutton on the Recycler

Unit (Review Figure 1-5

3. Remove the Cash Box from the iPRO-RC

™

Unit

to obtain the Banknotes just retrieved.

4. Use the appropriate User-supplied Key(s) to

unlock the Cash Box.

5. Open the Cash Box Door and remove the

retrieved Banknotes (Figure 2-6

Sending Retrieved Banknotes to the



Cash Box by Command

1. Send a Command to the iPRO-RC

™

Unit



from the Host Machine in order to retrieve



its Banknotes.

2. Remove the Cash Box from the iPRO-RC™ Unit

to obtain the Banknotes just retrieved.

3. Use the appropriate User-supplied Key(s) to

unlock the Cash Box.

4. Open the Cash Box Door and remove the

retrieved Banknotes (Figure 2-6

Retrieving Banknotes Directly

1. Turn the iPRO-RC™ Power Supply OFF.
2. Unlock and open the Recycle Unit Door using the

Key supplied.

3. Retrieve the Banknotes from the RC1-Bin Space

and/or the RC2-Bin Space by hand



(Figure 2-6

4. Close the Recycler Unit Door and re-lock it using

the Key supplied.

Figure 2-5

Banknote Restoration Methods

Figure 2-5

Banknote Restoration Methods

NOTE: When installing replacement

Banknotes directly, make sure the

denominations are aligned in an

identical order. Before inserting, flip-

over and Fan-Flip the Banknotes so

one of the bundle edges is smooth;

then place the Banknotes all the way

to the back of the Bin’s space. (Refer

to “Banknote Storage Requirements”

on page 1-4 of this Service Manual).

NOTE: The Banknotes in the



RC1-Bin Space and the RC2-Bin

Space will be retrieved note-by-note

into the Cash Box.

NOTE: The Banknotes in the



RC1-Bin Space and the RC2-Bin

Space will be retrieved note-by-note

into the Cash Box.

Figure 2-6

Retrieving Recycler Banknotes

Figure 2-6

Retrieving Recycler Banknotes

Содержание iPRO-100-SH2-RC



















































































































































Результаты поиска

Содержание iPRO-100-SH2-RC

Отзывы:

Бренды по названию

Популярные бренды

JCM iPRO-100-SH2-RC, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание iPRO-100-SH2-RC

Отзывы:

Бренды по названию

Популярные бренды