background image

© 2017 JCM Global Corporation

7

Part No. 960-000194R_Rev. A

GEN5™ Printer

P

RINTER

 E

RRORS

Most Printer Errors occur due to paper running out or user interven-
tion. See Table 4 below for Error Descriptions and recommended 
solutions. Refer to Figure 2 and Table 1 (Page 3) for Error Indicators.

Table 4 

GEN5 Printer Errors

Error

Description

Remedy

Paper Out

Paper is not detected.

Load new paper stack.

Lid Open

The Printer Lid is open.

Close the Printer Lid.

Temperature

Operating Temperature exceeds 
limits.

Determine cause of high 
temperature, let unit cool down.

Voltage

Power Supply voltage exceeds 
acceptable range.

Check cabling, apply correct 
power level.

Print Head

Error due to connectivity or 
interface issue with Print Head.

Power cycle and reset printer. If 
error recurs, service the printer.

Missing 

Black Index

The Black Index Mark is not 
detected.

Ensure paper meets 
specifications and is loaded 
correctly.

Paper Jam

Error in Paper path as Ticket is 
presented.

Open Printer Head, inspect for 
jammed Ticket.

GEN5_FlipBookRevA_v15.fm  Page 7  Friday, June 30, 2017  9:20 AM

Содержание GEN5 Series























Отзывы: