JCM EBA-30-SD3, Руководство по обслуживанию

Страница: 101 / 104

7 - 35
5
10
20
50
LED1 LED2 LED3 LED4 LED5
100
200
500
LED1 LED2 LED3 LED4 LED5
CHAPTER 7
Diagnostics
The home sensor is interrupted (PB unit is in the home position).
The home sensor is not interrupted (PB unit is not in the home position).
Condition of the Home Sensor LED1
The home sensor is interrupted (Centralization mechanism is in the
home position).
The home sensor is not interrupted (Centralization mechanism is not in
the home position).
Condition of the Home Sensor LED1 / orange LED
5-6 Bill Acceptance Test of Acceptor & AStacker
The denomination of bill received is shown on the Mode Display LED1 to LED5.
(VM-30 Mode Display LED: ex. Euro bills)
5-7 PB Unit Test
This is the test of PB unit operation. PB unit is cycled sequentially in certain intervals.
(VM-30 Mode Display LED1)
5-8 Centering Mechanism Test
This is the test of acceptor's centering mechanism. The centering mechanism is operated sequentially in
certain intervals. Do not stop this test when the centering mechanism is not in the home position, otherwise
the acceptor's head cannot be opened (orange LED on the CPU board turns on when the centering guide is
in the home position).
If the front cover of acceptor head became unable to be opened, use a hexagon-head screwdriver on
the side hole of acceptor to reposition the centering guides to the home position (see Chapter 2,
page 2-20).
(VM-30 Mode Display LED1 and orange LED on Acceptor's CPU board)