JCM Technologies EASY-ROLL, Руководство пользователя

Страница: 5 / 8

1- Automatic operation
Using buttons, radio transmitters or radio buttons
Turn option 6 (AUTOCLOSE) on the option switch to ON.
Connect a NO start/stop button on the terminals marked START. This button carries out two functions: start and stop.
Depending on the version, it is possible to use the terminals indicated as OPEN, CLOSE and STOP to make the movement.
If option 5 on the option switch is turned to ON, the motor starts when the button is pressed for the first time. It stops when
pressed for the second time and it closes when pressed for the third time if the end of the opening time is complete. If not, it
continues to open.
2- Semi-automatic operation (default option)
Using buttons, radio transmitters or radio buttons
Turn option 6 (AUTOCLOSE) on the option switch to OFF.
Connect a NO start/stop button on the terminals marked START. This button carries out two functions: start and stop.
Depending on the version, it is possible to use the terminals indicated as OPEN, CLOSE and STOP to make the movement.
If option 5 on the option switch is turned to ON, the motor starts when the button is pressed for the first time. It stops when
pressed for the second time and it closes when pressed for the third time if the end of the opening time is complete. If not, it
continues to open.
3- Open/close dead man operating
Turn options 1 and 2 on the option switch to ON.
Using pushbuttons
Connect two pushbuttons. One on the OPEN terminal that will operate as a dead man button in opening, and the other on the
CLOSE terminal that will operate as a dead man button in closing.
By radio
Radio dead-man operations are only possible using the radio button or the radio key switch, previously programmed on the
equipment. It is not possible with transmitters.
4- Semi-automatic operating in opening and dead man operating in closing
Turn option 2 on the option switch to ON.
Using pushbuttons
Connect two pushbuttons. One on the OPEN or START terminal that will operate as a start button in opening, and the other on
the CLOSE terminal that will operate as a dead man button in closing.
By radio
Radio dead-man operations are only possible using the radio button or the radio key switch, previously programmed on the
equipment. It is not possible with transmitters.
In automatic or semi-automatic mode, dead-man operations can be forced using the OPEN,
CLOSE and/or radio buttons. During this operating mode, the panel will take no enabled secur-
ities into account.
jcm technologies
5