JCM GLOBAL VEGA 100, Руководство по обучению обслуживанию, Страница: 15 / 24

Part No. 960-000165R_Rev. 1 © 2013, JCM American, Corporation
1 5
July, 2013 JCM Training Overview VEGA™ Banknote Acceptor
Lecture Notes
SOFTWARE DOWNLOAD PROCEDURE
Perform the following steps to download the VEGA Operating Software
Program (Refer to Figure 7 for the Tool Requirements and Harness Connector
locations).
However, before downloading the
VEGA Software Program, copy the
Downloader Program (UBA Down-
loader Version 2.10: specified), and
the VEGA Operating Software Pro-
gram into a VEGA Folder
([C:\VEGA]) created on the PC.
1. Turn Power to the VEGA Unit
OFF
.
2. Set DS 1, Switches #1, #7, & #8
ON
.
3. Apply Power to the VEGA Unit.
4. Confirm that the Front Panel
LED blinks at a Green Color
Rate.
5. Launch the copied Downloader
Program (UBA Downloader
2.10: Specified) from the PC
VEGA Folder ([C:\VEGA]).
The Program Installation Screen
shown in Figure 8 will appear.
Figure 7 Tools and Harness
Connection
a
e
1
b, c & d
e
e
2
h
g
f
Interface
Connector
Power Supply
To AC
VEGA USB
Connector
To PC USB Port
Power
a) PC (OS: Windows XP)
b) VEGA USB Driver (usbser.sys &
usbvega.inf)
(For Windows XP)
c) Downloader (UBA Downloader
Version2.10: Specified)
d) VEGA Software Program
e) USB Cable
e
1
) USB A Terminal
e
2
) USB Mini-B Terminal
f) VEGA Unit
g) Harness
h) Power Supply (e.g., UAC, VM-VEGA, etc.).
NOTE: DIP Switch Block No.
2 and No. 3 settings are not
required for this Software
Download