JCG JHR-N916R, Руководство пользователя

Страница: 24 / 79

www.jcgcom.com 23
please contact the ISP provider.
MAC address Clone—it allows you to regard the MAC address of LAN card or the specified
MAC address as that of WAN. If your MAC address has been bound, MAC address Clone
may help you.
* Only some routers in some countries or regions support it.
4. Routing settings:
Static router allows you to specify the forward routing for the special host or network. Then
any access to this host or network will not be forwarded through the default routing. This
situation applies to the LAN port with another router R2 connecting to this router R1.
For example: setting LAN network static routing: as shown in the figure, all of the internal
R2 LAN hosts can access the host internal the R1 LAN. But if the hosts of the R1 LAN
want to access that of R2 LAN, the static routing of R1 is required to be set as follows:
Dest. IP address: 192.168.0.1 (LAN address of R2)
Routing range: network
Netmask: 255.255.255.0 (netmask of R2)
Gateway IP address: 192.168.1.1 (WAN IP address of R2)
Network interface: LAN
After the setting, R1 internal host and R2 internal host should be able to communicate with
each other