JCG JHR-N916R, Руководство пользователя

Страница: 31 / 79

www.jcgcom.com 30
4. Access Control
Access Control -- Set access control policy for stations.
Allow -- Only allow stations in the list accessing wireless network.
Reject -- Reject stations in the list accessing wireless network.
Note:
If you are using wireless network to connect and set the router, please fill in MAC address
of WIFI of current computer in the access list when access policy is revised as Allow,
otherwise the wireless router could not be connected.
5. WDS Settings
Wireless distribution system (WDS) allows to conveniently extend wireless network. All AP
needs to work in the same channel if WDS function is to be used. If needed, please add
MAC address corresponding to AP to the list. Please make sure that the added base points
support WDS function.
Lazy mode -- In this mode, AP could be used as main access point so that other WDS
base points could extend wireless network range.
Bridge mode -- AP is working in bridging mode. MAC address of WDS base points of
intercommunication needs to be added to the list.
Note
In this mode, it receives data from a WDS base point and transmits them to other WDS
base points. Therefore, it does not accept connection requests from clients.