www.jcgcom.com
19
6.4 Access control
Access control --- control connected client to forbid or allow them to connect and access
your 2.4G wireless network.
Allow access – only allow the clients in the list to access 2.4G wireless network.
Forbid access – forbid the clients in the list to access 2.4G wireless network.
Tip:
1. If you are setting up the router with a wireless network connection, when the access
strategy is changed as
[Allow]
, please add the MAC address of the current computer
wireless network adaptor into the access list. Otherwise, you can not connect the wireless
router.
2. The input format of the MAC address is AABBCCDDEEFF without any symbol in this
address.
6.5 WDS setup
Wireless Distributed System (WDS) can extend a wireless network like Ethernet. With
WDS, all access points should work in same channel and MAC addresses (BSSID) of the
access points which should communicate with each other should be added to WDS list.
