www.jcgcom.com
15
parameters for AP client.
Wireless ISP mode—(relay WISP) under this mode, all Ethernet interfaces act as the LAN
interface. The device connects the Internet via the wireless network interface. NAT is
enabled. All LAN hosts access the Internet with same WAN IP addresses via the wireless
network interface. You can select a wireless access point via scanning. Support multiple
network connection modes such as static IP address, DHCP and PPPoE dialing. Under
this mode, keep the working channel same as it of the upstream AP and set up necessary
parameters for AP client and WAN.
AP client mode—(Client) under this mode, the wireless network driver will virtualize a
wireless client interface to connect the remote AP. The basic wireless network interface and
all Ethernet interfaces will be connected via bridge as the LAN interface. Under this mode,
keep the working channel same as it of the upstream AP and set up necessary parameters
for AP client and WAN.