www.jcgcom.com
17
Generic relay
– the wireless network interface is used as the wireless network access
point and wireless network client. The wireless network client interface can connect the
superior router as the WAN interface (switch to wireless ISP mode and select correct
WLAN wireless network interface).
Extend wireless client interface SSID
– it is the network name of the superior wireless
network access point which the wireless network client should connect.
Configuration file
– wireless network configuration file, when the wireless network client
is enabled, the authentication information of the access point for client connection can be
stored to the configuration file. When the client connects the access point next time, it can
easily connect the specified access point by selecting a configuration file without the need
of inputting security information.
6.2 Advanced setup
A user can set the advanced parameters of a wireless network with advanced setup.
Packet threshold
—the packet threshold decides the size of the data packet which will be
divided (one data block is sent several times). When the communication environment is
not good or the interference is severe, this threshold can be reduced. This threshold can
improve your network performance.
RTS threshold
– RTS (Request to Send) threshold decides the size of a data packet.
When this size is reached, AP will send one RTS to clear the channel before sending data.
A smaller RTS threshold is useful when the connected clients are plentiful, or the clients are