jcb ROBOT 150, Руководство по обслуживанию

Страница: 29 / 254

4 - 1
Loader Arm Safety Strut
Installing
! !
WARNING
Raised loader arms can drop suddenly and cause
serious injury. Before working under raised loader arms,
fit the loader arm safety strut.
2-1-1-6
! !
WARNING
You could be killed or seriously injured if the loader
control is accidentally operated. Make sure that no-one
goes near the machine whilst you fit the safety strut.
16-3-1-5
1 Empty the shovel or attachment, if appropriate, and raise
the loader arm enough to fit the safety strut.
2 Stop the engine.
3 Fit the strut:
a Remove the strut from its stowage position on the
right hand mudguard
C
.
b Place the strut around the lift ram.
c Secure the strut
A into position using strap B .
4 Start the engine.
5 Slowly lower the loader arm onto the safety strut. Stop
the movement immediately the weight of the arm is
supported by the strut.
Note: Extreme care must be taken when lowering the loader
arm onto the safety strut. 'Feather' the lever to lower the
loader arm slowly.
193490
Removing
! !
WARNING
You could be killed or injured if the loader control is
accidentally operated. Make sure no-one comes near
the machine while you remove the safety strut.
2-3-1-3
1 Make sure that the drive control lever is in the neutral
(rest) position.
2 Raise the loader arm to take the weight off the safety
strut
A . Stop the engine.
3 Remove the strut:
a Release securing strap B .
b Remove the safety strut from the lift ram.
c Return the safety strut to its stowage position on the
right hand mudguard C .
174170
Section 3
Routine Maintenance
9803/8500
Section 3
4 - 1
Issue 2*
*
*
C C
A A
B B