jcb JCB-CS38 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 37

jcb JCB-CS38 Скачать руководство пользователя страница 7

SO53 3LE
Customer Helpline 0845 600 5526 Monday to Friday 09.00 to 17.00
www.JCBdiy.com

SYMBOLS

Thank you for your purchase.

The chainsaw has been engineered and manufactured to a high standard for
dependability, ease of operation, and operator safety. If properly cared for, it will give
years of rugged, trouble-free performance.

Important:

Some of the following symbols may be used on the tool. Please learn

the meaning. Proper interpretation of the symbols will allow better and safer opera-
tion of the tool.

Indicates danger, warning or caution. It means “Attention! Your safety is
involved.”

Read the operation manual and follow all warnings and safety
instructions.

Wear eye, ear and head protection.

Do not smoke.

Hold and operate properly with both hands.

Do not operate with one hand only.

Engines produce carbon monoxide which is odorless and poisonous. Do
not operate in enclosed area.

Beware of kickback.

Avoid bar nose contact.

Wear non-slip, heavy-duty protective gloves when handling the saw.

JCB-CS38_Manual_D1.indd 7

JCB-CS38_Manual_D1.indd 7

11/12/2010 6:43:51 PM

11/12/2010 6:43:51 PM

«
...
5
6
7
8
9
...
»

Содержание JCB-CS38






































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды