24
JCB-20BLMS
Instruction & User Manual
Cross cut 90° and turntable 0°- 45° (Fig. 8)
The crosscut saw can be used to make crosscuts
of 0° - 45° to the left and 0° - 45° to the right in
relation to the stop fence
Important.
To make 90° crosscuts, the adjustable
extension block (16a) must be fully retracted.
m
Open the set screw (16b) for the adjustable
stop fence and retract the extension block.
m
The extension block (16a) must be retracted
far enough so that the distance between the
extension block (16a) and the saw blade (6)
amounts to a maximum of 8 mm.
m
Before making a cut, check that the
extension block (16a) and the saw blade (6)
cannot collide.
m
Secure the set screw (16b) again.
m
Loosen locking handle (11).
m
Release the turntable lever (29)
m
Use locking handle (11) to adjust the turn
table (14) to the desired angle. The indicator
(12) on the turntable must match the
desired angle on the mitre scale (13) on the
fixed saw table (15).
m
Re-tighten the locking handle (11) in order
to secure the turntable (14).
m
Cut as described under section “Cross cut
90° and turn table 0°”.
Precision adjustment of the stop for
mitre cut 45° (Fig. 1/9/10)
m
Lower the machine head (4) and secure
using the fastening bolt (23).
m
Fix the turn table (14) in the 0° position.
m
Loosen the locking adjuster screw(22) and
use the handle (1) to angle the machine
head (4) 45° to the left.
m
45° - position angle stop between the saw
blade (28) and turn table (14).
Fig.7.1
7
14
15
1
2
3
4
16
16a
16b
Fig.8
Fig.9
Fig.10
7
4
11
13
27
14
28
