21
JCB-20BLMS
Instruction & User Manual
m
Place a protractor (or any other angle
measurement device) between the saw
blade and the fence.
m
Measurement readout should be 90°.
m
If adjustment is necessary, loosen the socket
head screws fixing the fence to the fixed saw
table (15).
m
Adjust the the fence position so that it is
perpendicular to the saw blade and re
tighten the socket head screws.
Precision adjustment of the stop for
crosscut 90° (Fig. 1/5/6)
m
Lower the machine head (4) and secure
using the fastening bolt (23).
m
Loosen the locking adjuster (22).
m
Adjust the adjusting screw (27) until the
angle between the saw blade (28) and turn
table (14) is 90°.
m
Subsequently check the position of the angle
indicator. If necessary loosen the indicator
(19) using a Philips screwdriver, set to
position 0° on the angular scale (18) and
retighten the retaining screw
Fig.3
15
Fig.1
Fig.4
9
12
11
22
14
16
7
13
23
4
7a
Fig.5
Fig.6
22
27
20
18
19
14
28
Fig.7
3
35
2
8
Fig.2
29