![background image](http://html1.mh-extra.com/html/jcb/535-125-hi-viz/535-125-hi-viz_service-manual_640020066.webp)
Section 1-5 - General Information
Service Tools
Rivet Nuts
1-5-24
1-5-24
9803/3750-05 (1-06-00)
Fitting Procedure
1
Drill a hole in the machine body/framework where the
rivet nut is to be fitted. De-burr hole edges.
2
Screw the rivet nut onto the mandrel of the installation
tool. The bottom of the mandrel should be in line with
the bottom of the rivet nut
66-A
.
Fig 66.
3
Wind the body of the installation tool down the
threaded mandrel until it touches the head of the rivet
nut
67-B
.
Fig 67.
4
Insert the rivet nut (assembled to the tool) into the
hole drilled in step 1.
5
Hold handle
68-C
and at the same time draw the
mandrel into the installation tool by turning nut
68-D
.
The rivet nut will contract in length and form an 'upset'
(smooth bulge) seating itself against the body/
framework
68-E
.
Note: The thread of the rivet nut must not be stripped, take
care when 'upsetting' the rivet nut.
Fig 68.
6
Remove the installation tool.
Содержание 535-125 Hi Viz
