jcb 535-125 Hi Viz, Руководство по обслуживанию

Страница: 147 / 149

Section 3-4 - Routine Maintenance
Fluids, Lubricants and Capacities
Specifications
3-4-4 3-4-4
9803/3750-05 (3-23-01)
Coolant Mixtures
T3-009_3
Check the strength of the coolant mixture at least once a
year, preferably at the start of the cold period.
Replace the coolant mixture according to the intervals
shown in the machine's Service Schedule.
!M
WARNING
Antifreeze can be harmful. Obey the manufacturer's
instructions when handling full strength or diluted
antifreeze.
7-3-4-4_1
You must dilute full strength antifreeze with clean water
before use. Use clean water of no more than a moderate
hardness (pH value 8.5). If this cannot be obtained, use
de-ionized water. For further information advice on water
hardness, contact your local water authority.
The correct concentration of antifreeze protects the engine
against frost damage in winter and provides year round
protection against corrosion.
The protection provided by JCB High Performance
Antifreeze and Inhibitor is shown below.
Important: Do not exceed a 60% concentration, as the
freezing protection provided reduces beyond this point.
If you use any other brand of antifreeze:
– Ensure that the antifreeze complies with International
Specification ASTM D6210.
– Always read and understand the manufacturer's
instructions.
– Ensure that a corrosion inhibitor is included. Serious
damage to the cooling system can occur if corrosion
inhibitors are not used.
– Ensure that the antifreeze is ethylene glycol based
and does not use Organic Acid Technology (OAT).
50% Concentration (Standard)
Protects against damage down to -40 °C (-39 °F)
60% Concentration (Extreme Conditions Only)
Protects against damage down to -56 °C (-68 °F)
ProCarManuals.com