31
21-18RT
Instruction & User Manual
m
The knob type grip removed from the
plunge base can be installed on the offset
base instead of the bar type grip.
Using the tool with the plunge
base
m
Always hold the grips firmly with both hands
during operation. Operate the tool in the
same way as the trimmer base.
Using the straight guide
m
Optional accessory
1. Install the straight guide to the guide holder by
tightening the wing nut. Insert the guide holder
into the holes in the plunge base, and then tighten
the wing bolts.
2. Loosen the wing nut on the straight guide and
adjust the distance between the bit and the
straight guide. At the desired distance, tighten the
wing nut.
3. Operate the tool in the same way as the straight
guide for the trimmer base.
Using the templet guide
m
Optional accessory
1. Loosen the screws on the base and remove
them.Place the templet guide on the base, and
then tighten the screws.
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 31
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 31
13/09/2021 10:16
13/09/2021 10:16
