16
21-18RT
Instruction & User Manual
Overload protection
m
When the power tool is overloaded
(abnormal high current), the integral
electronic control system will automatically
protect the motor by switching off the
power supply.
m
Wait one or two seconds for the electronics
to reset, then restart the power tool.
Do not hold the work piece with your
hands.
WARNING!
MAINTENANCE
Cleaning
Switch off the power tool and disconnect
the power (remove battery/unplug) before
cleaning and maintenance. This helps avoid
the risk of electric shocks and accidental
starting.
WARNING!
m
Wipe the power tool with a dry or damp
cloth.
Do not use a wet cloth.
Do not
use detergent that contains solvent or
corrosive, abrasive additives.
This risks
damaging the surfaces of the power tool.
m
Clear the power tool vents and the rack
and pinion mechanism etc. of dust and dirt
after each use.
Do not clean ventilation
holes by inserting sharp objects in
them, such as screwdrivers and other
similar objects.
m
Stubborn contamination in areas hard to
access can be removed with compressed air
(max 3. bar).
m
Regularly check all fasteners, screws and
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
Brush inspection
m
Brush inspection is not required as the
power tool motor is brushless for superior
longevity and operation.
Power tool lubrication
m
JCB power tools are properly lubricated in
the factory and are ready for use.
Repairs and servicing
m
Power tools should be subject to periodic
preventative maintenance to ensure
continued safe and reliable operation.
m
If the power tool requires servicing or
repair (eg loss of power) do not continue to
operate the power tool.
m
Please return the power tool to an
authorized JCB service agent or repair
centre for service and repair using factory
supplied identical replacement parts.
Never open the power tool. The power
tool has no internal parts that the user can
service or repair. Never try to repair the
power tool yourself. Take to an authorised
service centre.
WARNING!
Transport and Storage
m
If the power tool will remain unused for any
length of time, it should be stored in the
original packaging.
m
Store the power tool in a dry, frost-free,
well ventilated place with a temperature of
no more than 40°C.
m
Keep all tools out of the reach of children.
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 16
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 16
13/09/2021 10:15
13/09/2021 10:15
