21
21-18RT
Instruction & User Manual
Installing or removing
trimmer bit
m
Insert the trimmer bit all the way into the
collet cone. Press the shaft lock and tighten
the collet nut with the wrench or tighten the
collet nut securely with the two wrenches.
To remove the bit, follow the installation
procedure in reverse.
Installing or removing the
trimmer base
1. Open the lock lever of the trimmer base, then insert
the tool into the trimmer base aligning the groove
on the tool with the protrusion on the trimmer base.
ASSEMBLY
Always be sure that the tool is switched off
and the battery cartridge is removed before
carrying out any work on the tool.
WARNING!
Do not tighten the collet nut without
inserting the bit.
The collet cone may break.
NOTE
The shaft lock may not return to the original
position when you tighten the collet nut at the
installation of the trimmer bit. The shaft lock
returns to the original position when you start
the tool.
NOTE
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 21
2886 21-18RT 2886 21-18RT Brushless Router and Accessories Manual.indd 21
13/09/2021 10:16
13/09/2021 10:16
