JC Systems 620A, Справочное руководство

Страница: 32 / 41

Section 4-2-3 Tune Controllers
Each control channel has two independent sets of Dual (Inc & dec) PID tuning parameters.
The tuning parameter screens are identical for all four sets with the exception of an additional screen
2 and Event H for CH2 set 2. If the event is programmed off or the function disabled set 1 is
use.
age 2: Parameters 1 – 3 of 11.
s ) being tuned.
e in seconds. 15 sec. Max.
P roportional Band (P) in Control channel units.
P roportional Gain in decimal units.
band = SPAN/Pgain, Pgain = SPAN/Pband. The Span value is set in the controller configuration.
) action. 0:00 to 99:99 sec
e
Max error for reset action.
value
for de-integration and reduce over integration.
and setting following the last page of CH1 set 2 & CH2 set 2.
This screen allows the selection of set 2 for use whenever a default event is turned on. Event G for
CH1 set
in
Page 1 : Select the Control channel and PID set to tune.
P
et Line 1 will always display the CH and Stage (
Line 2: Select Cycle Tim
Line 3:
Line 4:
The Pband and Pgain value will automatically adjust when the other parameters value is changed.
P
Page 3: Parameters 4 – 6 of 11.
Line 2: Select Reset (I
Line 3: Reset Windup Inhibit %. Select the % of th
Pband to be used as the
Line 4: Unwind Factor. Multiplier of Reset (I)