JBT Fresh'n Squeeze 2nd Generation Multi-Fruit Juicer, Руководство оператора

Страница: 34 / 40

34
FNS-0012-060-EN June 2019 Rev A
Troubleshooting
Condition Corrective Action
Juicer will not run
•
Reset breaker
•
Power cord plugged in?
•
Doors and covers closed and locked?
Orifice tube stuck in strainer tube
• Orifice tube installed incorrectly
•
Excess pulp in strainer, thoroughly clean out pulp
from strainer
•
Top of orifice tube damaged
•
Strainer tube damaged or bent
Peel and seeds in juice
•
Cutter missing or loose
•
Strainer tube not tight in manifold
• Top of strainer tube damaged
Foam in reservoir
•
Cutter damaged
• Mixing juice and pulp too fast causes air to mix in
juice
Fruit bursting and waste is wet
• Fruit is too large (3-7/8" max)
•
Check for damaged fruit
Juice in waste and/or discharge is wet
• Check for damaged fruit
•
Inspect orifice tube top for damage or wear
•
Strainer tube holes are plugged
•
Fruit too large
Juice nozzle leaking juice
•
Nozzle O-ring missing or damaged; replace O-ring
Fruit not feeding out of hopper into cup
•
Remove wax build-up in hopper
• Wipe with food grade non-stick product inside
hopper
Cutter damaged and has rolled top edge
•
Dried peel, stems stuck in upper cup cutter
• Broken top edge of orifice tube wedged inside cutter
• Clean out obstruction
Juicer stalls and shuts off
• Cutter dull
• Fruit too large
•
Orifice tube damaged
•
Strainer tube needs cleaning
Juicer runs then shuts off
•
Check door safety switches, locks and reservoir
high level switch
Juice yield less than 2-1/2 gallons per case
•
Fruit soft or too large
• Orifice tube, strainer tube and/or cutter damaged;
replace damaged parts
Clear plastic window of juice reservoir scratched
•
Do not use scrub pads on any plastic parts