59
VTX A
8
| Rigging Manual
12.6 - SUSPENSION BAR AND MIXED ARRAYS
The Suspension Bar can used as a pull back for mixed arrays but not as the array frame at the top. In mixed array conditions, an array
frame is always used at the top to provide the structural rigidity needed for mechanical safety. Note that the suspension bar can be used
at the top of a B18 only array. Details on the suspension bar and B18 usage are available in the B18 Rigging Manual. All mixed array
configurations should be checked with LAC-III for mechanical safety.
CAUTION:
The VTX A8 Suspension Bar should never be used at the top of an array when VTX A8 and VTX B18 products
are used as part of the same array. Always check with LAC-III for mechanical safety.
TIP:
The VTX A8 Suspension Bar can be used at the top of B18 only arrays as the main suspension frame. Refer to the VTX
B18 Rigging Manual for suspension bar usage exaples.
