47
VTX A
8
| Rigging Manual
STEPS:
• Use the electric hoists to raise the two B18s off the ground.
• Once suspended, remove the VT by first removing the front two QRPs and then the two at the rear.
• The two rear QRPs can be restored back to their storage positions. The other four QRPs should remain free so that they can
be used to connect to the first A8 cabinet.
1
2
3
CAUTION:
All six Quick Release Pins and rigging arms should always be used when connecting one B18 subwoofer
to another. No pins should be left unused under any conditions. A8 cabinets can only be connected to the B18 rigging
points that are connected to the array frame. Normally, these are the four most forward connection points.
Once the frame is connected, lift the B18 off the ground and disconnect the Vertical Transport cart.
Cable Strain Relief
