JBL SRX900 Series, Руководство по монтажу

Страница: 43 / 50

43
Rigging Manual
11.4 ASSEMBLING GROUND-STACKED ARRAYS
The base plate attaches to any compatible SRX900 Series subwoofer by the M20 pole mount adapter/plate. Before attaching the base
plate, assemble the subwoofer array/stack and place it into the desired location and position. The base plate connects to the subwoof-
ers using the included M20 knob. SRX900 Series cabinets connect to the base plate using the cabinet’s front pins, and the link pin in
the rear. Follow the instructions below to assemble a ground-stacked SRX900 Series array. The same steps are used regardless of the
subwoofer type and SRX9xxLA cabinet used.
STEPS:
• Place the base plate onto the top subwoofer in the array and use the included M20 knob to secure the base plate onto the
subwoofer.
• If the subwoofer stack is more than one cabinet high, secure the cabinets together with a ratchet strap. The strap should wrap
around the entire body of both subwoofers, and the webbing of the strap should sit in the laser cut channel on the base plate
to prevent it from sliding.
1
2
CAUTION: Safe limits for ground-stacked arrays always assume that the stacking surface (floor and/or stage) is flat .
Do not deploy ground-stacked arrays on non-flat surfaces to avoid tipping hazards .
1
2